350A industrial MIG and MMA output
Use the sheet-listed 30-350A MIG and 20-350A MMA output ranges for high-output welding work.
DABU MIG-350 350A Industrial MIG/MMA Welder
350A · 80% duty · 380V
Three-phase industrial MIG/MMA inverter with 30-350A MIG output, 20-350A MMA output, 80% sheet-stated duty cycle at 350A and 0.8-1.6mm wire capacity.
R29,325.00 incl. Vat
In stock
MIG output
30-350 A
MMA output
20-350 A
Rated duty cycle
80% at 350 A
Machine overview
Set up for the work in front of you.
The confirmed specifications are organised for quick comparison. Open any line for the practical detail.
MIG output 30-350 A
The supplied sheet lists a 30A to 350A MIG current range.
MMA output 20-350 A
The supplied sheet lists a 20A to 350A MMA current range.
Rated duty cycle 80% at 350 A
The supplied sheet states an 80% duty cycle at 350A; test conditions are not provided.
Input Three-phase AC 380 V +/-15%
The supplied sheet states AC 380V +/-15% input and 14.8kW input power; Damion confirmed the machine is three-phase.
Wire range 0.8-1.6 mm
The listed wire-diameter range is 0.8mm to 1.6mm.
Protection IP21S
The supplied sheet formats the protection degree as 21S IP.
Why this machine
MIG, FCAW and MMA functions
The supplied sheet lists MIG, manual MIG, FCAW and MMA, with 2T/4T, burn-back, post-gas and synergic functions.
Built for larger wire diameters
The stated 0.8-1.6mm wire range supports larger MIG-wire formats. Confirm the fitted feed components for the wire selected.
350A MIG and MMA output for industrial work
The DABU MIG-350 is a three-phase MIG/MMA inverter with a 30-350A MIG range and a 20-350A MMA range. The supplied specification sheet states AC 380V +/-15% input, 14.8kW input power and an 80% duty cycle at 350A.
Set up for MIG, FCAW and MMA work
The supplied sheet lists MIG, manual MIG, FCAW and MMA, with 2T/4T trigger modes, burn-back, post-gas and synergic functions. Listed wire diameters run from 0.8mm to 1.6mm.
Confirm the installation requirements
This is a three-phase 380V machine. The supplied sheet does not state the plug, breaker, cable or installation requirements. Have a qualified electrician confirm that your industrial supply is suitable before installation.
| Welding Process | MIG / MAG, Flux-Cored / Gasless MIG, Stick / ARC / MMA, Multi-Process |
| Input voltage | Three-phase AC 380 V +/-15% |
| Input power | 14.8 kW |
| MIG current range | 30-350 A |
| MMA current range | 20-350 A |
| Rated duty cycle | 80% at 350 A (sheet stated) |
| Wire diameter | 0.8-1.6 mm |
| Efficiency | 85% |
| Protection degree | IP21S |
| Weight | 57 kg |
| Dimensions | 635 x 300 x 580 mm |
- 40KD MIG torch with 3 m cable
- 500 A electrode holder
- 500 A earth clamp
- 3 m + 3 m, 50 mm2 cable
- Air regulator
This machine carries a 12-month warranty against manufacturing faults affecting electrical components and internal assemblies. Contact Amalgum Welding Shop before returning a machine for assessment. This warranty does not replace your statutory rights.
Related products
More from this category
Review each product page for its current price, availability, and purchasing options.
Common questions
Before you buy.
What electrical supply does the DABU MIG-350 require?
The supplied sheet states AC 380V +/-15% input and 14.8kW input power. Damion confirmed this is a three-phase machine. The sheet does not state the plug, breaker, cable or installation requirements, so have a qualified electrician confirm the correct supply before installation.
What welding processes does it support?
The supplied sheet lists MIG, manual MIG, FCAW and MMA. It does not confirm TIG capability, aluminium capability or the exact setup required for every wire type.
What does 80% duty cycle at 350A mean?
The supplied sheet states an 80% duty cycle at 350A. It does not provide a test standard, ambient temperature or other test conditions, so the figure is presented exactly as supplied.
Which wire sizes are listed?
The sheet lists wire diameters from 0.8mm to 1.6mm. Confirm the installed drive rolls, liner, contact tip, torch and shielding gas for your selected wire before ordering.
What functions are included?
The sheet lists 2T/4T trigger modes, burn-back, post-gas, synergic control, MIG, manual MIG, FCAW and MMA.
What accessories are listed?
The sheet lists a 40KD MIG torch with 3m cable, a 500A electrode holder, a 500A earth clamp, two 3m 50mm2 cables and an air regulator.
What warranty applies?
This machine carries a 12-month warranty against manufacturing faults affecting electrical components and internal assemblies. Contact Amalgum Welding Shop before returning a machine for assessment. This warranty does not replace your statutory rights.
Ready when the numbers fit
DABU MIG-350 350A Industrial MIG/MMA Welder
Review the confirmed specification, then add it to your cart or ask us about the job before deciding.
Delivery charges depend on the order and destination. Gas orders and delivered orders below R2,000 attract transport charges; collection can be arranged as an alternative.
R29,325.00 incl. Vat
Not sure this is the right one?
WhatsApp us the job and we'll tell you — including when a different product fits better.
Reviews
There are no reviews yet.