Gasless MIG setup
Use flux-cored wire without a separate shielding-gas cylinder for the sheet-listed MIG process.
Pinnacle MIGARC 145 Gasless MIG Welding Machine
120A · 25% duty · 220V
Compact 220V dual-inverter machine for gasless flux-cored MIG, MMA and LIFT TIG, with up to 120A MIG output and an included MB15 MIG torch.
R1 725,00
In stock
MIG output
20-120 A
MMA output
20-100 A
TIG output
20-100 A
Machine overview
Set up for the work in front of you.
The confirmed specifications are organised for quick comparison. Open any line for the practical detail.
MIG output 20-120 A
The supplied sheet lists a 20A to 120A gasless flux-cored MIG range.
MMA output 20-100 A
The technical table lists a 20A to 100A MMA welding range.
TIG output 20-100 A
The sheet lists a 20A to 100A LIFT TIG range; a TIG torch and consumables are not listed in the package.
Rated duty cycle 25% at 120 A
This is the sheet-stated duty cycle; test conditions are not provided.
Input AC 220 V +/-15%
Rated input is single-phase AC 220V +/-15% at 50/60Hz.
Weight 5.3 kg
The compact sheet-stated machine weight supports portable workshop use.
Why this machine
Three listed processes
The MIGARC 145 combines gasless MIG, MMA and LIFT TIG capability in one compact power source.
Portable package
The 5.3kg machine includes an MB15 MIG torch and earth clamp for a compact workshop setup.
Compact gasless MIG for quick workshop setup
The MIGARC 145 is listed for gasless flux-cored MIG, MMA and LIFT TIG. Its compact 5.3kg format and 220V single-phase input suit DIY, repair and light-industrial work where portability matters.
Three sheet-listed welding processes
The technical table gives a 20-120A MIG range, 20-100A MMA range and 20-100A TIG range. The package includes an MB15 MIG torch with 3m cable and an earth clamp with 1.5m cable.
Confirm the complete setup for MMA or TIG
The sheet does not list an electrode holder, TIG torch or TIG consumables in the package. Confirm the additional equipment required before ordering for MMA or LIFT TIG.
| Welding Process | Flux-Cored / Gasless MIG, TIG, Stick / ARC / MMA, Multi-Process |
| Input Voltage | 220V |
| Torch Family | MB15 |
| Start Method | Lift TIG |
| Rated input voltage | AC 220 V +/-15%, single phase |
| Rated frequency | 50/60 Hz |
| No-load voltage | 56 V |
| Rated input power | 1.8 kW |
| MIG current range | 20-120 A |
| MMA current range | 20-100 A |
| TIG current range | 20-100 A |
| Rated duty cycle | 25% at 120 A (sheet stated) |
| Electrode size | 1.6 / 2.0 / 2.5 / 3.2 mm |
| Welding wire size | 0.6 / 0.8 / 0.9 / 1.0 mm |
| Weight | 5.3 kg |
| Dimensions | 320 x 165 x 230 mm |
- Inverter power source
- MB15 MIG torch with 3 m cable
- Earth clamp with 1.5 m cable
The supplied MIGARC 145 sheet does not state warranty or return terms. Exact coverage, exclusions, remedies, return conditions and transport responsibilities must be confirmed in writing before purchase. Your rights under applicable consumer law still apply.
Related products
More from this category
Review each product page for its current price, availability, and purchasing options.
Common questions
Before you buy.
Does the MIGARC 145 support gasless MIG?
Yes. The sheet specifically lists gasless MIG using flux-cored wire. Gas-shielded solid-wire MIG is not confirmed on this sheet.
Which welding processes are listed?
The supplied sheet lists gasless flux-cored MIG, MMA and LIFT TIG.
What power supply does it require?
The sheet rates it for single-phase AC 220V +/-15% at 50/60Hz with 1.8kW rated input power. It does not state plug, breaker, extension-lead or generator requirements; confirm the supply before use.
Which wire sizes can it use?
The sheet lists 0.6mm, 0.8mm, 0.9mm and 1.0mm welding wire. Confirm the fitted drive roll, liner and contact tip for the chosen flux-cored wire.
What comes in the package?
The sheet lists the inverter power source, an MB15 MIG torch with 3m cable and an earth clamp with 1.5m cable.
Does it include the equipment for MMA and LIFT TIG?
The package list does not name an electrode holder, TIG torch or TIG consumables. Confirm and order the required accessories separately before using those processes.
What does the 25% duty cycle mean?
The supplied sheet states a 25% duty cycle at 120A but does not provide the test standard or ambient conditions. The machine needs cooling time when used at higher output.
What warranty applies?
The supplied sheet does not state a warranty or return terms. Ask Amalgum to confirm the written product-specific terms before purchase.
Ready when the numbers fit
Pinnacle MIGARC 145 Gasless MIG Welding Machine
Review the confirmed specification, then add it to your quote basket or ask us about the job before deciding.
Delivery charges depend on the order and destination. Gas orders and delivered orders below R2,000 attract transport charges; collection can be arranged as an alternative.
R1 725,00
Not sure this is the right one?
WhatsApp us the job and we'll tell you — including when a different product fits better.
Reviews
There are no reviews yet.