Multi-process flexibility
Switch between gas-shielded MIG, gasless MIG, MMA and LIFT TIG for different workshop jobs.
PRIMIMIG 251C
250A · 60% duty · 220V
250A MIG, gasless MIG, MMA and LIFT TIG inverter with digital voltage/current display, burn-back control, spot-welding control and over-temperature protection.
R13662,00 incl. Vat
In stock
Output range
20-250 A
Processes
MIG / MMA / LIFT TIG
Duty cycle
60% at 40 C
Machine overview
Set up for the work in front of you.
The confirmed specifications are organised for quick comparison. Open any line for the practical detail.
Output range 20-250 A
The supplied technical table lists a 20A to 250A output-current range.
Processes MIG / MMA / LIFT TIG
The sheet also explicitly lists gasless MIG operation.
Duty cycle 60% at 40 C
The sheet states 60% at 40 C but does not identify the reference amperage or test conditions.
Wire size 0.6-1.2 mm
The supplied table lists welding wire diameters from 0.6mm to 1.2mm.
Input voltage 220 V +/-10%
The supplied technical table lists 220V +/-10% input.
Item code 6-100120
Use this item code to resolve the naming differences shown on the source sheet.
Why this machine
Adjustable wire finishing
Burn-back and arc-ending controls help tune how the wire finishes at the end of a weld.
Spot-welding control
The sheet lists a spot-welding function for timed, repeatable weld placement.
Four welding processes up to 250A
The PRIMIMIG 251C combines gas-shielded MIG, gasless MIG, MMA and LIFT TIG in a 220V inverter platform. Its 20-250A output range supports a broad mix of workshop fabrication and repair work.
Digital control for repeatable setup
The supplied sheet lists a digital voltage/current display, burn-back control, arc-ending control and spot-welding functions. These controls help tune wire finishing and timed welds for the job.
Supplied for MIG setup
The package includes a 3m MB25 MIG torch, a 2m earth cable and an argon flowmeter. An electrode holder, TIG torch, gas cylinder, regulator details, welding wire and TIG consumables are not listed as included.
Confirm the exact model name
The source heading identifies the product as PRIMIMIG 251C, while the panel says MIG 251C and the chassis says MULTIMIG 251. Use item code 6-100120 to confirm the exact machine before purchase.
| Welding Process | MIG / MAG, Flux-Cored / Gasless MIG, TIG, Stick / ARC / MMA, Multi-Process |
| Output Amperage | 250A |
| Start Method | Lift TIG |
| Rated input voltage | 220 V +/-10% |
| Rated frequency | 50/60 Hz |
| Rated input power capacity | MIG 8.4 kVA; MMA 9.5 kVA |
| Rated input current | MIG 38 A; MMA 43 A |
| No-load voltage | 52 V |
| Output current range | 20-250 A |
| Duty cycle | 60% at 40 C (reference amperage not stated) |
| Welding wire size | 0.6-1.2 mm |
| Welding electrode size | 2.0-4.0 mm |
| Weight | 20 kg |
| Dimensions | 622 x 280 x 450 mm |
- Inverter power source
- MB25 MIG torch, 3 m
- Earth cable, 2 m
- Argon flowmeter
The supplied PRIMIMIG 251C sheet does not state warranty or return terms. Exact coverage, exclusions, remedies, return conditions and transport responsibilities must be confirmed in writing before purchase. Your rights under applicable consumer law still apply.
Related products
More from this category
Review each product page for its current price, availability, and purchasing options.
Common questions
Before you buy.
Which welding processes does the PRIMIMIG 251C support?
The supplied sheet lists gas-shielded MIG, gasless MIG, MMA and LIFT TIG.
What is the output-current range?
The technical table states a 20-250A output-current range.
Can it run gasless MIG wire?
Yes. The source sheet explicitly lists MIG/Gasless as a supported process. Confirm the correct polarity, drive setup and wire type before welding.
Does it include equipment for MMA and LIFT TIG?
The package lists a MIG torch, earth cable and argon flowmeter. It does not list an electrode holder, TIG torch, regulator details or TIG consumables, so these must be confirmed separately.
Which wire sizes are listed?
The technical table lists welding wire from 0.6mm to 1.2mm. Confirm the fitted drive rolls, liner, contact tip and process setup for the chosen wire.
What does the 60% duty cycle mean here?
The sheet states 60% at an ambient temperature of 40 C, but it does not provide the reference amperage or test conditions. It should not be read as 60% at the full 250A output without confirmation.
Why do different names appear on the machine?
The sheet heading says PRIMIMIG 251C, the panel says MIG 251C and the chassis says MULTIMIG 251. Confirm item code 6-100120 when ordering.
What warranty applies?
The supplied sheet does not state warranty or return terms. Ask Amalgum to confirm the written product-specific terms before purchase.
Ready when the numbers fit
PRIMIMIG 251C
Review the confirmed specification, then add it to your quote basket or ask us about the job before deciding.
Delivery charges depend on the order and destination. Gas orders and delivered orders below R2,000 attract transport charges; collection can be arranged as an alternative.
R13662,00 incl. Vat
Not sure this is the right one?
WhatsApp us the job and we'll tell you — including when a different product fits better.
Reviews
There are no reviews yet.